Sökning - 26 resultat för 'TK 156'

This document describes the quality grades for sorted Polypropylene (PP) waste streams as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. Polypropylene waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The scheme provides for a division of information between "Required Data", where a statement is required, and additional "Optional Data" as agreed between the supplying and receiving party. This document does not cover the general characterization addressed in EN 15347-1.

This document describes the quality grades for sorted poly(ethylene terephtalate) (PET) waste streams as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PET waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The scheme provides for a division of information between "Required Data", where a statement is required, and additional "Optional Data" as agreed between the supplying and receiving party. This document does not cover the general characterization addressed in EN 15347-1.

This document describes the quality grades for sorted Polyethylene (PE) waste streams as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. Polyethylene waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The scheme provides for a division of information between "Required Data", where a statement is required, and additional "Optional Data" as agreed between the supplying and receiving party. This document does not cover the general characterization addressed in EN 15347-1.

This document provides relevant characteristics and typical values for polypropylene (PP) recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.

This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.

NOTE 1 Examples of designations of plastic recyclates are given in Annex A.

NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

This document provides relevant characteristics and typical values for PET recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.

This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.

NOTE 1 Examples of designations of plastic recyclates are given in the Annex A.

NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

This document provides relevant characteristics and typical values for polyethylene (PE) recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.

This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.

NOTE 1 Examples of designations of plastic recyclates are given in Annex A.

NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

This document provides relevant characteristics and typical values for poly(vinyl chloride) (PVC) recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.

This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.

NOTE 1 Examples of designations of plastic recyclates are given in Annex A.

NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

This document provides relevant characteristics and typical values for polystyrene (PS) recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.

This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.

NOTE 1 Examples of designations of plastic recyclates are given in the Annex A.

NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

This document provides relevant characteristics and typical values for Acrylonitrile-butadiene-styrene (ABS) recyclates intended for groups of defined applications (the product families). The relevant characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.

This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products. This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.

NOTE 1 Examples of designations of plastic recyclates are given in Annex A.

NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.

This document is the general part of the series that describes the designation system for plastic recyclates. This document is dealing with recyclates after the recycling operation and prior to converting and compounding (when applicable). It is dealing with preparation of samples and determination of properties.

NOTE 1 This document supports the underlaying standards of this series that, per polymer type, provide an overview of the relevant characteristics and typical values for recyclates for use in certain application groups (product families) in combination with the relevant converting technologies.

NOTE 2 The overview of the relevant properties is based on and further extends the relevant properties given in EN ISO 10350 1.

This document specifies the physical and mechanical properties of pipes made from unplasticized polyamide (PA-U) in accordance with ISO 16486-1, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to which it refers. The ISO 16486 series of standards is applicable to PA-U piping systems, the components of which are connected by fusion jointing and/or mechanical jointing. In addition, this document lays down dimensional characteristics and requirements for the marking of pipes. Pipes conforming to this document are jointed typically by using mechanical, electrofusion or butt fusion techniques.

This document specifies the physical and mechanical properties of fittings made from unplasticized polyamide (PA-U) in accordance with ISO 16486‑1, intended to be buried and used for the supply of gaseous fuels. It also specifies the test parameters for the test methods to which it refers. The ISO 16486 series is applicable to PA-U piping systems, the components of which are connected by fusion jointing and/or mechanical jointing. In addition, it lays down dimensional characteristics and requirements for the marking of fittings. In conjunction with the other parts of the ISO 16486 series, this document is applicable to PA-U fittings, their joints, joints with components of PA-U and joints with mechanical fittings of other materials, and to the following fitting types: — fusion fittings (electrofusion fittings and butt fusion fittings), and — transition fittings.

ISO 11357-5:2013 specifies a method for the determination of reaction temperatures and times, enthalpies of reaction, and degrees of conversion using differential scanning calorimetry (DSC). The method applies to monomers, prepolymers, and polymers in the solid or liquid state. The material can contain fillers and/or initiators in the solid or liquid state.

This document provides product category rules (PCR) for Type III environmental product declarations, as described in EN ISO 14025 and EN 15942, for plastics piping systems inside the building structures and their main structural components, as specified by the list of product standards provided in Annex CC. This document encompasses: - both pressure and non-pressure applications; - metal fittings which are used in a plastic piping system. The intended function of the system considered is to convey liquids according to EN 806 (for potable water supply), EN 1264 (for heating and cooling systems), EN 12828 (for radiators), EN 12056 (for soil and waste discharge and for water traps). In case there is no application standard available, this document can also be used for other plastics piping systems such as for example for rainwater gutters, ventilation systems or electrical conduits. This document specifies product category rules of construction products as defined in and is intended to be used in conjunction with EN 15804+A2. In addition to EN 15804+A2, this document specifies: - the functional unit (consisting of pipes, fittings and ancillary components) and declared unit (consisting of pipes and/or fittings); - the system boundaries and additional mandatory modules to be declared; - the processes to be included in the installation phase; - scenarios for module A4, A5; - use conditions for the use phase (B modules); - reference service life (RSL); - end of life scenarios.

This document provides product category rules (PCR) for Type III environmental product declarations, as described in EN ISO 14025 and EN 15942, for plastic piping systems buried outside building structure and their main structural components, as specified by the list of product standards provided in Annex CC. Main structural components are: - pipes; - fittings (e.g. flange couplers, bends and reducers, valves and electrofusion fittings); - manholes and inspection chambers (where applicable, e.g. for drains and sewers). This document encompasses both pressure and non-pressure applications. The intended function of the system considered is to convey fluids according to EN 476 (for sewers, drain and surface water); EN 805 (water supply), or EN 12007 (gas supply). In case there is no application standard available, this document can also be used for other plastics piping systems such as cable conduits and surface water piping systems. This document specifies the rules for the product category of construction products as defined in and is intended to be used in conjunction with EN 15804+A2. In addition to EN 15804+A2, this document specifies: - the functional unit (consisting of pipes, fittings, manholes and inspection chambers and ancillary components) and declared unit (consisting of pipes and/or fittings and/or manholes and /or inspection chambers); - the system boundaries and additional mandatory modules to be declared; - the processes to be included in the installation phase; - scenarios for module A4, A5; - use conditions for the use phase (B modules); - reference service life (RSL); - end of life scenarios.

This International Standard describes two methods for the determination of free formaldehyde (HCHO) in polymer dispersions. The procedure has been evaluated using acrylic, acrylonitrile butadiene, carboxylated styrenebutadiene and vinyl acetate polymer dispersions. Both test methods may also be applicable to polymer dispersions of other compositions.

Method A is the preferred method for polymer dispersions with a free-formaldehyde content higher than .

Method B is recommended if lower formaldehyde contents have to be determined or arbitration analyses have to be carried out.

Both methods minimize changes in free-formaldehyde concentration that can result from changes in the physical or chemical properties of polymer dispersions.

There are no known limitations to these methods when used in the manner described.

This document describes the quality grades for sorted polystyrene (PS) waste streams as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PS waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The scheme provides for a division of information between "Required Data", where a statement is required, and additional "Optional Data" as agreed between the supplying and receiving party. This document does not cover the general characterization addressed in EN 15347-1.

This document describes the quality grades for sorted poly(vinyl chloride) (PVC) waste streams as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PVC waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The scheme provides for a division of information between "Required Data", where a statement is required, and additional "Optional Data" as agreed between the supplying and receiving party. This document does not cover the general characterization addressed in EN 15347-1.

This International Standard describes two methods for the determination of free formaldehyde (HCHO) in polymerdispersions. The procedure has been evaluated using acrylic, acrylonitrile butadiene, carboxylated styrenebutadieneand vinyl acetate polymer dispersions. Both test methods may also be applicable to polymer dispersionsof other compositions.

Method A is the preferred method for polymer dispersions with a free-formaldehyde content higher than .

Method B is recommended if lower formaldehyde contents have to be determined or arbitration analyses have to becarried out.

Both methods minimize changes in free-formaldehyde concentration that can result from changes in the physical or chemical properties of polymer dispersions.

There are no known limitations to these methods when used in the manner described.

ISO 16365-1:2014 establishes a system of designation for thermoplastic polyurethane elastomers, which is based on ISO 1043 (all parts) and ISO 11469.

The designation system may be used as the basis for specifications. It is applicable to all thermoplastic polyurethane elastomers. It applies to materials ready for normal use in the form of powder, granules or pellets, unmodified or modified by colourants, fillers or other additives, etc.

ISO 19252:2008 specifies a method for determining the scratch properties of plastics under defined conditions. The method involves making a scratch by moving a hard instrument (scratch tip) of specified geometry under specified conditions of load and speed across the surface of a test specimen and then assessing the result.

The method is used to investigate the behaviour of specified types of specimen under the scratch conditions defined and for classifying the type of scratch of specimens within the limitations inherent in the test conditions. It can also be used to determine comparative data for different types of material by means of a so‑called scratch map in which the types of scratch behaviour for each set of test conditions of test load and test speed are determined using the basic method of constant-load testing, and also by means of the so‑called critical normal load determined using an alternative method of linearly increasing load testing.

The method is suitable for use with uncoated and unlacquered thermoplastic moulding materials and thermosetting moulding materials.

The method specifies the preferred dimensions for the test specimen and the preferred scratch-tip geometry.

This document specifies a test method for determining the leaktightness and the ease of operation of a valve made of thermoplastic material following an impact applied to the operating device. Additionally, a different procedure of the test on diaphragm valve can be specified by the valve manufacturer.

This document applies to unplasticized poly(vinyl chloride) (PVC-U) profiles that are intended to be used for the fabrication of windows and doors in accordance with the EN 14351 series or EN 16034, shutters according to EN 13659 and other construction profiles in accordance with the EN 13245 series. Furthermore, this document is also applicable for profiles used in other PVC-U products, which can include recyclates. This document gives references and specifies general and product-specific design for recycling principles. NOTE 1 In this document, the term “PVC-U profiles” is used to refer to construction profiles made from PVC-U, PVC-UE, and PVC-U-based natural fibre composites (NFC). Criteria for the use of materials, process conditions, and recyclability are defined, which are considered during the design process. This document defines principles to - obtain the highest possible share of recyclability of the PVC-U part in the profile, and - increase the share of PVC-U recyclate in the profile, while complying with requirements for the final product, where existent and defined elsewhere. This document establishes flowcharts which help to assess, (i) how recyclability is evaluated and (ii) whether inclusion of rPVC-U is possible. The following components of the final PVC-U construction product are considered in this document: - profiles; - reinforcements; - gaskets; - insulations; - coverings. This document specifies only the technical connection of the profile to other components (such as glazing or hardware) and their impact on the recyclability of the PVC-U profiles. The recyclability of the other components (e.g. glazing, aluminium cover, hardware) is excluded from this document. NOTE 2 Examples for profiles included in this document and their intended use can be found in Figure 1.

This document specifies the main characteristics and associated test methods for assessing of acrylonitrile-butadiene-styrene (ABS) recyclates intended for use in the production of semi-finished/finished products. It is intended to support parties involved in the use of ABS recyclates (rABS) to agree on specifications for specific and generic applications. This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.

This document defines a system for the classification of recycled plastics based on the available data depth (Data Quality Levels, DQL) and provides guidelines for the labelling of the recyclate type and recycled content in compounds. It is intended to support parties involved in the use and trading of recycled plastics, explicitly including digital trading platforms.

This document specifies the classifications, requirements and test methods for unplasticized poly(vinyl chloride) (PVC-U) profiles with thermo-laminated foils designed for external uses which are intended to be used for the fabrication of windows and doors. NOTE 1 For editorial reasons, in this document, the term "window" is used for window/door. NOTE 2 For the purpose of production control, test methods other than those specified in this document can be used.