Personaladministration

Kommittébeteckning: SIS/TK 477 (Skeppsteknik och Marin Teknologi)
Källa: ISO
Svarsdatum: den 25 okt 2021
Se merSe mindre
 

This document establishes a uniform, safe and consistent approach to training personnel to enable them to establish and maintain the required competencies in relation to maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear.
It also provides the necessary information for interested parties to grant authorization and effectively evaluate and audit training, supporting the IMO Requirements, Section 3.
It describes the competence route, resources, facilities and certification requirements for personnel trained by a manufacturer or by an authorized service provider to carry out maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear. This document also sets out the competence route of the candidate, and the resources that the training provider needs to deliver the training.
This document is intended to be used in conjunction with ISO 23678-2, ISO 23678-3 and ISO 23678-4.

Kommittébeteckning: SIS/TK 477 (Skeppsteknik och Marin Teknologi)
Källa: ISO
Svarsdatum: den 25 okt 2021
Se merSe mindre
 

This document establishes a uniform, safe and consistent approach to training and assessment of personnel to enable them to establish and maintain the required competencies in relation to maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear.
It also provides the necessary information for interested parties to grant authorization, effectively evaluate and audit training, supporting the IMO Requirements, Section 3.
It specifies the initial training programme for personnel certified by a manufacture or by an authorized service provider to carry out maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear. This document specifies the training requirements for Initial Service Technician training only.
This document is intended to be used in conjunction with ISO 23678-1, ISO 23678-3 and ISO 23678-4.
This document is applicable to the following types of lifeboats (including free-fall lifeboats), rescue boats (including fast rescue boats), launching appliances and release gear.
Survival craft types:
a) single fall totally enclosed lifeboats with sprinkler and air systems;
b) twin fall totally enclosed lifeboats with sprinkler and air systems;
c) partially enclosed lifeboats;
d) tender lifeboats;
e) freefall lifeboats;
f) open lifeboat;
g) inflatable rescue boats;
h) rigid rescue boats;
i) semi ridged inflatable rescue boats;
j) rigid fast rescue boats;
k) rigid inflatable fast rescue boats.

Survival craft propulsion system types:
a) inboard diesel engines;
b) outboard engines;
c) propeller drives;
d) jet drives.
Davit types:
a) gravity single and twin fall outrigger;
b) hydraulic single pivoting/luffing;
c) hydraulic multi pivot/luffing;
d) telescopic;
e) gravity roller track;
f) gravity free fall primary;
g) free fall hydraulic secondary;
h) A-frame hydraulic;
i) single arm slewing (manual, electric);
j) davits with stored power systems.
Winch types:
a) twin drum;
b) single drum;
c) gravity lowering, electric hoisting;
d) gravity lowering, hydraulic hoisting;
e) hydraulic hoisting and lowering.
Hook release system types:
a) on-load/off load(load not over centre);
b) on-load/offload (load over centre);
c) off load;
d) freefall hydraulic;
e) automatic.

 

Kommittébeteckning: SIS/TK 477 (Skeppsteknik och Marin Teknologi)
Källa: ISO
Svarsdatum: den 25 okt 2021
Se merSe mindre
 

This document establishes a uniform, safe and consistent approach to the technical training of personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear.
It also provides the necessary information for interested parties to grant authorization, effectively evaluate and audit training, supporting the IMO Requirements, Section 3.
It specifies the training requirements for the Level 1 controlled environment education and technical training for personnel certified by a manufacturer or an authorized service provider to carry out maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear.
The Level 1 training is split into two Stages, both covered in this document:
— Stage 1, Service Technician technical controlled environment education and training, has five modules that consist of classroom-based theory followed by practical sessions. The five modules encompass the scope and range of technical knowledge and skills required to assume type specific design coverage of survival craft, release systems, davits and winches. The modules focus on supporting the requirements in part of the IMO Requirements, paragraphs 8.1, 8.2.1.1-8.2.1.6, 8.2.2, and 8.2.3.
— Stage 2, Service Technician technical controlled environment experience and assessment, where candidates undertake a minimum of four supervised scenarios-based practical exercises assessments covering the range of type specific complete systems for which they will be certified.
This document is intended to be used in conjunction with ISO 23678-1, ISO 23678-2 and ISO 23678-4.
This document is applicable to the following types of lifeboats (including free-fall lifeboats), rescue boats (including fast rescue boats), launching appliances and release gear.
Survival craft types:
a) single fall totally enclosed lifeboats with sprinkler and air systems;
b) twin fall totally enclosed lifeboats with sprinkler and air systems;
c) partially enclosed lifeboats;
d) tender lifeboats;
e) freefall lifeboats;

f) open lifeboat;
g) inflatable rescue boats;
h) rigid rescue boats;
i) semi ridged inflatable rescue boats;
j) rigid fast rescue boats;
k) rigid inflatable fast rescue boats.
Survival craft propulsion system types:
a) inboard diesel engines;
b) outboard engines;
c) propeller drives;
d) jet drives.
Davit types:
a) gravity single and twin fall outrigger;
b) hydraulic single pivoting/luffing;
c) hydraulic multi pivot/luffing;
d) telescopic;
e) gravity roller track;
f) gravity free fall primary;
g) free fall hydraulic secondary;
h) A-frame hydraulic;
i) single arm slewing (manual, electric);
j) davits with stored power systems.
Winch types:
a) twin drum;
b) single drum;
c) gravity-lowering, electric hoisting;
d) gravity-lowering hydraulic hoisting;
e) hydraulic hoisting and lowering.
Hook release system types:
a) on-load/off load (load not over centre);
b) on-load/offload (load over centre);
c) off load;
d) freefall hydraulic;

e) automatic.

 

Kommittébeteckning: SIS/TK 477 (Skeppsteknik och Marin Teknologi)
Källa: ISO
Svarsdatum: den 25 okt 2021
Se merSe mindre
 

This document establishes a uniform, safe and consistent approach to the in-field competence assessment of personnel for the maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear.
It also provides the necessary information for interested parties to grant authorization, effectively evaluate and audit training, supporting the IMO Requirements, Section 3.
It specifies the Level 2 in-field initial and ongoing competence assessment for personnel certified by a manufacturer or an authorized service provider to carry out maintenance, thorough examination, operational testing, overhaul and repair of lifeboats (including free-fall lifeboats) and rescue boats (including fast rescue boats), launching appliances and release gear.
The training an individual receives whilst following a development process is covered in ISO 23678-2 and ISO 23678-3.
The competence requirements contained in this document provide a clear description of performance in-field in respect to:
a) what practitioners are expected to do;
b) the underpinning knowledge and skills they require to enable them to do what is expected;
c) how they can demonstrate what is expected of them;
d) how their performance can be assessed.
This document is intended to be used in conjunction with ISO 23678-1, ISO 23678-2 and ISO 23678-4.
This document is applicable to the following types of lifeboats (including free-fall lifeboats), rescue boats (including fast rescue boats), launching appliances and release gear.
Survival craft types:
a) single fall totally enclosed lifeboats with sprinkler and air systems;
b) twin fall totally enclosed lifeboats with sprinkler and air systems;
c) partially enclosed lifeboats;
d) tender lifeboats;
e) freefall lifeboats;

f) open lifeboat;
g) inflatable rescue boats;
h) rigid rescue boats;
i) semi ridged inflatable rescue boats;
j) rigid fast rescue boats;
k) rigid inflatable fast rescue boats.
Survival craft propulsion system types:
a) inboard diesel engines;
b) outboard engines;
c) propeller drives;
d) jet drives.
Davit types:
a) gravity single and twin fall outrigger;
b) hydraulic single pivoting/luffing;
c) hydraulic multi pivot/luffing;
d) telescopic;
e) gravity roller track;
f) gravity free fall primary;
g) free fall hydraulic secondary;
h) A-frame hydraulic;
i) single arm slewing (manual, electric);
j) davits with stored power systems.
Winch types:
a) twin drum;
b) single drum;
c) gravity-lowering, electric hoisting;
d) gravity-lowering hydraulic hoisting;
e) hydraulic hoisting and lowering.
Hook release system types:
a) on-load/off load(load not over centre);
b) on-load/offload (load over centre);
c) off load;
d) freefall hydraulic;

e) automatic.