Byggförnödenheter

Ämnesområden: Byggförnödenheter
Kommittébeteckning: SIS/TK 615 (Lås och beslag)
Källa: CEN
Svarsdatum: den 3 dec 2020
Se merSe mindre
 

This document specifies requirements and test methods for durability, strength, security and function of sash balances.

Ämnesområden: Byggförnödenheter
Kommittébeteckning: SIS/TK 615 (Lås och beslag)
Källa: CEN
Svarsdatum: den 3 dec 2020
Se merSe mindre
 

This document specifies requirements and test methods for durability, strength, security and function of sash fasteners for windows and door height windows.

Ämnesområden: Byggförnödenheter
Kommittébeteckning: SIS/TK 615 (Lås och beslag)
Källa: CEN
Svarsdatum: den 3 dec 2020
Se merSe mindre
 

This document specifies performance requirements for the strength and durability of hardware for the operation of movable sashes of windows and door height windows including requirements and test methods common to all hardware. This document is applicable to the hardware suitable for windows and door height windows in Table 1, whatever the material used for the construction of the window. This document does not apply to the following: - fusible links, - hardware for lifting side-hung windows, - fixing devices that are used to assemble or install a fixed window, - devices that are used for the permanent fixing of a complete window into a building structure, - mechanisms for the pneumatic or hydraulic remote operation of windows, - single axis hinges (other than those, which provide a pivot-function for windows), - single axis hinges as covered in EN 1935, - hardware for sliding doors and folding doors as covered in EN 1527 - door and window bolts as covered in EN 12051.

Ämnesområden: Byggförnödenheter
Kommittébeteckning: SIS/TK 615 (Lås och beslag)
Källa: CEN
Svarsdatum: den 3 dec 2020
Se merSe mindre
 

This document applies to mechanical padlocks and padlock fittings used on buildings and general use, and specifies the test methods to be used.

This document specifies performance and other requirements for strength, security, durability, performance, and corrosion resistance of padlocks. It establishes one category of use, two categories of durability, six categories for corrosion resistance and six grades for security based on performance tests that simulate attack.

Limited manual attack testing is included in this document because the machine testing does not replicate all known manual attacks.

Ämnesområden: Byggförnödenheter
Kommittébeteckning: SIS/TK 615 (Lås och beslag)
Källa: CEN
Svarsdatum: den 11 jan 2021
Se merSe mindre
 

This document provides product category rules (PCR) for Type III environmental declarations for:
Building hardware products for opening and closing doors, gates, windows and shutters:
— Door and window handles (EN 1906)
— Hinges (EN 1935)
— Window fittings (EN 13126)
— Shutter hardware devices (e.g. EN 14648)
— Door closers (incl. door coordinators) and hold open devices (EN 1154, EN 1155, EN 1158)
— Sliding door gear (EN 1527, EN 15706)
— Glass door gear
Building hardware products for locking and unlocking doors, gates, windows and shutters:
— Locks (EN 12209, EN 15685)
— Locking cylinders (EN 1303)
— Padlocks (EN 12320)
— Push button locks (BS 8607)
— Exit devices (EN 179, EN 1125)
Electromechanical building hardware products:
— Mechatronic cylinders (EN 15684)
— Mechatronic padlocks (EN 16864)
— Mechatronic door furniture (EN 16867)
— Electromechanically operated locks and striking plates (EN 14846)
— Electrically controlled exit systems for use on escape routes (EN 13637)
This document complements the core rules for the product category of construction products as defined in the European standard EN 15804:2012A2:2019. The document is to be used in conjunction with EN 15804:2012+A2:2019.
NOTE The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
— defines the parameters to be declared and the way in which they are collated and reported;
— describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
— defines rules for the development of scenarios;
— includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying the EPD, including the specification of the data quality to be applied;

— includes the rules for reporting the predetermined, environmental and health information that is not covered by Life Cycle Assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
— defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.

Kommittébeteckning: SIS/TK 179 (Fönster, dörrar, portar, glasfasader och bygglas)
Källa: CEN
Svarsdatum: den 11 jan 2021
Se merSe mindre
 

This document specifies requirements regarding design and test methods for external and internal power operated pedestrian doorsets. Such doorset constructions may be operated electro-mechanically, electro-hydraulically or pneumatically.
This document covers safety in use of power operated pedestrian doorsets used for normal access as well as in emergency and escape routes and as fire resistance and/or smoke control doorsets.
The type of doorsets covered include power operated pedestrian sliding, swing and revolving doorsets, including balanced doorsets and folding doorsets with a horizontally moving leaf.
Power operated pass doorsets for which the main intended use is giving safe access for persons incorporated in other doors are covered by the scope of this document.
This document deals with all significant hazards, hazardous situations and events relevant to power operated doorsets when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex J).
All lifetime phases of the power operated pedestrian doorsets including transportation, assembly, dismantling, disabling and scrapping are considered by this document.
This document does not apply to:
— vertically moving doors;
— doors on lifts;
— doors on vehicles;
— power operated doors or gates mainly intended for vehicular traffic or access for goods;
— doors used in industrial processes;
— partition walls;
— doors outside the reach of people (such as crane gantry fences);
— turnstiles;
— platform doors.
This document does not cover special functions of doorsets, such as security in banks, airports, etc. or fire compartments, where conformity of the specific function with requirements of the application shall have the preference.
This document does not deal with any specific requirements on noise emitted from power operated pedestrian doorsets as their noise emission is not considered to be a relevant hazard.
NOTE Noise emission of power operated pedestrian doorsets is not a significant hazard for the users of these products. It is a comfort aspect.
This document is not applicable to power operated pedestrian doorsets manufactured before the date of its publication.
This document does not cover operation in environments where there is a risk of explosion.