Huvudskydd

Ämnesområden: Huvudskydd
Kommittébeteckning: SIS/TK 399 (Ögonskydd)
Källa: CEN
Svarsdatum: den 18 jul 2018
Se merSe mindre
 

This document specifies general requirements for eye and face protectors. These protectors are intended to provide protection for the eyes and faces of persons against common occupational hazards such as impacts from flying particles and fragments, optical radiation, dusts, splashing materials, molten metals, heat, flame, hot solids, harmful gases, vapours and aerosols.

Additional requirements for eye and face protectors used during welding and related techniques and for mesh protectors are given in ISO 16321-2 and ISO 16321-3.

This document applies to all afocal (plano) and prescription lens protectors and components.

This document also applies to those products of eye and face protection used for occupational-type tasks but not performed as part of an occupation, e.g. "do-it-yourself".

This document does not apply to:

— Protectors specifically intended for protection against sunlight for which ISO 12312 series applies;

— protectors for medically prescribed applications (not occupational); e.g. eye protection for severe dry eye, tints prescribed for medical conditions;

— protectors intended to control exposure of the eyes of patients during diagnosis or treatment (e.g. ISO/DTR 22463);

— protectors for use during medical or e.g. aesthetic applications, e.g. intense light sources (ILS) for which ISO 12609 series applies;

— protectors specifically intended for sports for which ISO 18527 series applies;

— laser protectors for which ISO 19818 applies;

— face protectors intended for live-working to protect against short-circuit electric arcs for which IEC 62819 applies;

— protectors intended to protect against ionizing radiation, e.g. X-rays, for which IEC 61331-3 applies.

Ämnesområden: Huvudskydd
Kommittébeteckning: SIS/TK 399 (Ögonskydd)
Källa: CEN
Svarsdatum: den 18 jul 2018
Se merSe mindre
 

This document specifies additional material, design, performance and marking requirements for eye and face protectors designed to provide protection for the eyes and faces of persons against occupational hazards during welding and related techniques, such as optical radiation, impacts from flying particles and fragments, and hot solids. The other applicable requirements for welding protectors are given in ISO 16321-1.

This document also applies to those products of eye and face protection used for occupational-type tasks but not performed as part of an occupation, e.g. "do-it-yourself".

Ämnesområden: Huvudskydd
Kommittébeteckning: SIS/TK 399 (Ögonskydd)
Källa: CEN
Svarsdatum: den 18 jul 2018
Se merSe mindre
 

This document specifies additional material, design, performance and marking requirements for mesh protectors designed to provide protection for the eyes and faces of persons against mechanical hazards such as impacts from flying particles and fragments.

The other applicable requirements for mesh protectors and the frames/mountings to which they are intended to be fitted are given in ISO 16321-1.

This document is not applicable to protectors for use against liquid splash (including molten metal), hot solid risks, electrical hazards, infrared and ultraviolet radiation. For protection against these hazards suitable additional or alternative protectors according ISO 16321-1 will be needed.

This document does not apply to mesh protectors used in sports such as fencing.

Ämnesområden: Huvudskydd
Kommittébeteckning: SIS/TK 399 (Ögonskydd)
Källa: CEN
Svarsdatum: den 23 jul 2018
Se merSe mindre
 

This document specifies the reference test methods for determining the spherical, cylindrical, and prismatic refractive properties of unmounted and mounted plano lenses (non-corrective lenses) for eye and face protectors.

This document does not apply to any eye and face protection requirement standards for which other test methods are specified.

Other test methods may be used if shown to be equivalent.

Ämnesområden: Huvudskydd
Kommittébeteckning: SIS/TK 399 (Ögonskydd)
Källa: CEN
Svarsdatum: den 23 jul 2018
Se merSe mindre
 

This document specifies the reference test methods for determining the physical optical properties of personal eye and face protectors.

This document does not apply to any eye and face protection requirements standards for which other test methods are specified.

Other test methods may be used provided they have been shown to be equivalent.

Ämnesområden: Huvudskydd
Kommittébeteckning: SIS/TK 399 (Ögonskydd)
Källa: CEN
Svarsdatum: den 23 jul 2018
Se merSe mindre
 

This document specifies the reference test methods for determining the physical and mechanical properties of protectors.

This document does not apply to any eye and face protection requirements standards for which other test methods are specified.

Other test methods may be used if shown to be equivalent.

Ämnesområden: Huvudskydd
Kommittébeteckning: SIS/TK 399 (Ögonskydd)
Källa: CEN
Svarsdatum: den 23 jul 2018
Se merSe mindre
 

This document specifies dimensions and tolerances of the headforms used for the testing of eye and face protectors.

Additional information are given for:

— Anthropometric measurement methods;

— Anthropometric data for head and face dimensions;

— Human test panels.

Kommittébeteckning: SIS/TK 399 (Ögonskydd)
Källa: CEN
Svarsdatum: den 25 jul 2018
Se merSe mindre
 

This document applies to all afocal (plano power) goggles, intended for eye protection against hazards including ultraviolet and visible solar radiation, rain, snow and wind, during downhill skiing, snowboarding and other similar activities. It deals with materials, construction, optical properties and testing.

Requirements for the labelling and marking of goggles and for information to be supplied by the manufacturer are also specified. Information on the Selection and use of downhill skiing and snowboarding goggles is given in Annex A.

This document does not apply to:

a) eye protectors for protection when operating or travelling on a motorized vehicle;

b) eye protectors for protection against artificial optical radiation, such as those used in solaria;

c) eye protectors for direct observation of the sun;

d) eye protectors intended for sports with unrelated hazards and risks.

Kommittébeteckning: SIS/TK 399 (Ögonskydd)
Källa: CEN
Svarsdatum: den 25 jul 2018
Se merSe mindre
 

This document applies to all eye protectors intended for eye protection against hazards during the sports of Squash, Racquetball and Squash 57 and sports with similar hazards and no greater risks. It applies to eye protectors that incorporate prescription lenses, but not to eye protectors designed for use over spectacles. It deals with materials, construction, optical properties and testing.

Requirements for the labelling and marking of eye protectors and for information to be supplied by the manufacturer are also specified. Information on the selection and use of eye protectors for Squash, Racquetball and Squash 57 is given in Annex A.

This document does not apply to:

a. sports eye protectors designed for use over prescription spectacles;

b. eye protectors for occupational applications;

c. eye protectors without lenses;

d. eye protectors for sports where the hazards are unrelated to the hazards in or involve greater risks than Squash, Racquetball and Squash 57.