Produkter från textilindustrin

Ämnesområden: Textilier: allmänt
Kommittébeteckning: SIS/TK 160 (Textil)
Källa: CEN
Svarsdatum: den 23 sep 2019
Se merSe mindre
 

This part of ISO 12945 describes a method for the determination of the resistance to pilling, fuzzing, and matting of textile fabrics using a rotating pilling box apparatus.

Ämnesområden: Textilier: allmänt
Kommittébeteckning: SIS/TK 160 (Textil)
Källa: CEN
Svarsdatum: den 23 sep 2019
Se merSe mindre
 

This part of ISO 12945 describes a method for the determination of the resistance to pilling, fuzzing, and matting of textile fabrics using a modified Martindale method.

Ämnesområden: Textilier: allmänt
Kommittébeteckning: SIS/TK 160 (Textil)
Källa: CEN
Svarsdatum: den 23 sep 2019
Se merSe mindre
 

This part of ISO 12945 describes a method for the determination of the resistance to pilling, fuzzing, and matting of textile fabrics using the random tumble pilling tester. This method is applicable to most of woven and knitted fabrics, including napped fabrics (fleeces, inlay fabrics).

This method is not applicable to fabrics which cannot tumble freely.

Ämnesområden: Textilier: allmänt
Kommittébeteckning: SIS/TK 160 (Textil)
Källa: CEN
Svarsdatum: den 23 sep 2019
Se merSe mindre
 

This part of ISO 12945 describes a method for the visual assessment of pilling, fuzzing, and matting respectively of textile fabrics. This method is applicable to most of woven and knitted fabrics, including napped fabrics (fleeces, inlay fabrics).

Ämnesområden: Belagda tyger; Gummi
Kommittébeteckning: SIS/TK 154 (Gummi och gummiprodukter)
Källa: ISO
Svarsdatum: den 1 okt 2019
Se merSe mindre
 

This document specifies a method of test for measuring the force required to separate, by stripping, two plies of fabric bonded with rubber, or a rubber layer and a fabric ply bonded together.

The method is applicable when the ply surfaces are approximately plane or when they are in the form of a cylinder having an internal diameter greater than approximately 50 mm. The method is not applicable when the ply surfaces contain sharp bends, angles or other gross irregularities which cannot be excluded when cutting out test pieces.

This document does not apply to coated fabrics, which are tested in accordance with ISO 2411, or textile conveyor belts, which are tested in accordance with ISO 252.

Ämnesområden: Textila tyger
Kommittébeteckning: SIS/TK 160 (Textil)
Källa: CEN
Svarsdatum: den 1 okt 2019
Se merSe mindre
 

This document specifies the test methods which can be used to measure elasticity and related

properties of fabrics when they undergo a deformation of their surface. Two methods are specified: a

dynamic method (method A) and a static method (method B). This document does not apply to narrow

fabrics.

The results obtained cannot be compared. The choice of test method are agreed between parties and

indicated in the test report.

Ämnesområden: Textila tyger
Kommittébeteckning: SIS/TK 160 (Textil)
Källa: CEN
Svarsdatum: den 1 okt 2019
Se merSe mindre
 

This document specifies the test methods which can be used to measure the elasticity and related

properties of narrow fabrics. Two methods are itemized: one for the purpose of product quality

assurance (method A) and the other for product performance when in use (method B).

Ämnesområden: Belagda tyger
Kommittébeteckning: SIS/TK 160 (Textil)
Källa: CEN
Svarsdatum: den 7 okt 2019
Se merSe mindre
 

This document describes a test method for the determination of the bending force of rubber or plastic coated textile.

Ämnesområden: Textila tyger
Kommittébeteckning: SIS/TK 160 (Textil)
Källa: CEN
Svarsdatum: den 7 okt 2019
Se merSe mindre
 

This document describes a pneumatic pressure method for the determination of bursting strength and bursting distension of textile fabrics.

NOTE ISO 13938-1 describes a method using hydraulic pressure.

The method is applicable to knitted, woven, nonwoven and laminated fabrics. It can be suitable for fabrics produced by other techniques. The test is suitable for test specimens in the conditioned or wet state.

From the available data there appears to be no significant difference in the bursting strength results achieved using hydraulic or pneumatic burst testers, for pressures up to 800 kPa. This pressure range covers the majority of performance levels expected of general apparel. For speciality textiles requiring high bursting pressures, the hydraulic apparatus is more suitable.

Ämnesområden: Textila tyger
Kommittébeteckning: SIS/TK 160 (Textil)
Källa: CEN
Svarsdatum: den 7 okt 2019
Se merSe mindre
 

This document describes a hydraulic method for the determination of bursting strength and bursting distension of textile fabrics.

In this document, a hydraulic pressure is applied using a constant rate of pumping device.

NOTE ISO 13938-2 describes a method using pneumatic pressure.

The method is applicable to knitted, woven, nonwoven and laminated fabrics. It can be suitable for fabrics produced by other techniques. The test is suitable for test specimens in the conditioned or wet state.

From the available data, there appears to be no significant difference in the bursting strength results achieved using hydraulic or pneumatic burst testers, for pressures up to 800 kPa. This pressure range covers the majority of performance levels expected of general apparel. For speciality textiles requiring high bursting pressures, the hydraulic apparatus is more suitable.

Ämnesområden: Textilier: allmänt
Kommittébeteckning: SIS/TK 160 (Textil)
Källa: CEN
Svarsdatum: den 7 okt 2019
Se merSe mindre
 

This part of ISO 105 specifies a method for determining the colour fastness and ageing properties of all kinds and forms of dyed and printed textiles and/or other organic substrates under the action of an artificial light source representative natural daylight (D65), and under the simultaneous action of heat. Of the five different sets of exposure conditions specified (see 6.1), four use D65, and the other one uses a somewhat lower cut-off wavelength. The test method gives special consideration to the light and heat conditions that occur in the interior of a motor vehicle.

The five different sets of conditions using the different optical filter systems specified may produce different test results. Results from tests performed using different apparatus (instrument types) for the same set of conditions and optical filter system shall not be compared, as comparable performance has not been validated.